2-Stroke Clutch

Bikeberry offers in-stock clutch parts including clutch cables for Grubee, Flying Horse, Mega Motors and most 2-stroke and 4-stroke bicycle gas engine kits.

Items 21 to 30 of 33 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Set Descending Direction
  1. Clutch Camshaft

    Clutch Camshaft

    $4.95

    Clutch Camshaft

    Part #27 on the Clutch Diagram

    2-Stroke engine kits for bicycles require the clutch camshaft. It works in tandem with the clutch arm to transfer the signal  from the clutch cable to the bucking bar to release or grab the clutch pads. This part can be located directly under the clutch arm and inside of the drive sprocket case cover.

     

    Package includes

    Clutch Camshaft

    Part Number (See Parts Manual): 3-27

    Learn More
  2. Clutch Arm

    Clutch Arm

    $4.95

    Clutch Arm

    Part #28 on the Clutch Arm

    Located on the exterior of the 66cc (80cc) 2 stroke bicycle engine, the clutch arm should be spring loaded to be parallel to the engine. It is directly connected to the clutch cable and the clutch camshaft.  

     

    Part Number (See Parts Manual): 3-28

    Learn More
  3. Clutch Wire Clip

    Clutch Wire Clip

    $3.95

    Clutch Wire Clip

    Part #40 on the Clutch Diagram

    Motorized bicycles with 66cc/80cc 2-stroke engines require a clutch wire clip to secure the end of the clutch cable to the clutch arm. It is a small brass or silver shaft with a tiny screw.

     

    Package includes

    Clutch wire clip

    Part Number (See Parts Manual): 3-31

    Learn More
  4. Extension Spring

    Extension Spring

    $3.95

    Extension Spring

     Part #33 on the Clutch Diagram

    This spring creates tension between the clutch cable and the clutch arm so that the clutch arm will spring back into place after the clutch lever is released.

     

    Package includes

    Extension Spring

    Part Number (See Parts Manual): 3-26

    Learn More
  5. Heat Shield Spring

    Heat Shield Spring

    $4.95

    Part Number (See Parts Manual): 3-38B

    Learn More
  6. Clutch Screw Base

    Clutch Screw Base

    $3.95

    Clutch Screw Base

    Part #35 on the Clutch Diagram

    Much like the name suggests the clutch screw base acts as an divider between the heat shield spring and the extension spring on the clutch cable. Located on the rear center of the 66cc (80cc) bicycle engine, it is a required part that threads into the bike engine.

    Package includes

    Clutch Screw Base

    Part Number (See Parts Manual): 3-35

    Learn More
  7. Clutch Cable

    Clutch Cable

    $4.95

    Part Number (See Parts Manual): 3-38 or D3-90

    Learn More
  8. Replacement Clutch Cable

    Replacement Clutch Cable

    $2.50

    If you're in need of a replacement clutch cable, look no further! This replacement clutch cable will work with your existing clutch cable's sheath if it needs to be replaced.

    Learn More
  9. Upgraded Alloy Clutch Lever

    Locking Hook Alloy Clutch Lever

    $12.95

    Our new upgraded alloy clutch lever includes an insert that sits against the lever when pulled in. Older clutch levers have a simple button that's pressed down to lock. However, this button can often slip if you hit a bump or a rock on the road. This lever fights against this and keeps clutch lever taught when you need it, keeping it disengaged as long as you need it! Learn More
  10. Alloy Clutch Lever

    Alloy Clutch Lever

    $9.95

    Part Number (See Parts Manual): 3 - 47 or D3-19

    Learn More

Items 21 to 30 of 33 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Set Descending Direction