Looking for a heavy duty wheel that’s made for speed? The BBR Tuning 26 Inch Heavy Duty 10 Spoke STAR Motorized Bike Mag Wheel Set is exactly what you’ve been looking for. Disc-brake ready and pre-installed with a motorized bike sprocket, these wheels will hold up better than any set of wheels you’ve ever used on your bike.
Unlike your run-of-the-mill bike wheels, these mag wheels are made for motorized bike riding. These heavy metal wheels have no spokes, which means you’re never truing your wheels to keep them straight- they’re permanently straight! Their upgraded bearings hold up much longer than bike bearings and are made to take high speeds, whereas most bike wheels are only meant to take speeds of up to 10 MPH (and we all know motorized bikes go faster than that).
Each set of STAR mag wheels are disc break-ready. Both the front and rear wheels have 6x stud ports you can install nearly any disc brake rotor to, which means you don’t have to use any more messy adapters to get a disc brake on there. Each rear wheel comes with its own 36 tooth motorized bike sprocket, which means you’ll get lots of top end speed without the hassle of installing one of those ugly, rubber rag joints or expensive adapters to your bike. Graphics on wheel are stickers and are easily removable as desired.
These wheels are also single-walled with tire lips big enough to fit knobby 26” tires with lots of grip and tubes that hold tons of air. As far as installation, it couldn’t be any easier:
• Install the disc of your disc brake assembly on to the studs of the wheel and fasten them
• Install a single-speed freewheel or 3-7 speed cassette on to the rear wheel and lock it in place
• Line each wheel with tire liner, then install your inner tubes and tires
• Install the wheels on to your bike, fasten down the remaining nuts on their axles, and align your chain
Whether you’re riding on the streets, on the trail, or on the track, riding with the BBR Tuning 26 Inch Heavy Duty 10 Spoke STAR Motorized Bike Mag Wheel Set will have you riding in style and security.
• Size: 26" x 1”, 10x Spoke
• Color: Red
• Tire Compatibility: 26” x 1.5” – 26” x1.95” tires with Schrader valves
• Brake Compatibility: Disc Brake Only
• Bicycle Engine Sprocket Size: 36 Tooth
WARNING: THIS WHEEL SET IS NOT DESIGNED TO BE USED WITH RIM BRAKES. USE OF RIM BRAKES, WHICH STOP THE WHEEL BY PLACING FRICTION ON THE RIM EDGE MAY RESULT IN PREMATURE FAILURE OF THE RIM. ALL MAG WHEELS COME INCLUDED WITH DISC BRAKES AND CALIPERS. IF YOUR BIKE IS NOT DISC BRAKE READY, WE RECOMMEND THE BBR TUNING DISC BRAKE CALIPER BRACKET AVAILABLE ATBBR Tuning Billet Aluminium Disc Brake Caliper Bracket
Great look on any bike, straighter than spoke wheels, seem durable plus disc brake ready.
Better then expected. Mounted with BBR disc brackets and fit 2.3" tires on the rims!
When I first got these I was tripping on how to connect the old bike chain side magazine / one way. I took the rear mag on bike to a shop today and for around 40 bucks out the door they installed my parts needed for the bike chain plus the proper spacers !!! I'm so glad it was that easy !! I was worried for a minute there !
I have ridden it a few times now and just ordered the Hooker style expansion chamber !!!
The wheels are nice but suffered cosmetic damage from shipping. The adapter brake brackets don’t work with the brake disk size. The brake disk should be larger
They came packed good. The wheels them selves had many paint imperfections from bumping around at some point. The stickers are not that great but very easy to remove. The wheels other than the finish are Great,true, and strong. They are Also Very smooth, very nice bearings. The brake calipers that come with them are pretty nice too. All and all they are a Great addition and I would buy them again!