The Generator bullet light Kit requires no battery to run. Includes front and rear light. Mounting brackets are included. Chrome bullet headlight is 4-1/4 x 3-1/2 x 3-1/2. Generator unit is 12v 6w and measures 3-1/4 x 4-1/2 x 1-3/4. Little tail light measures 2 x 1 x 1. Light is NOT designed to work on ELECTRIC or GAS powered bicycles. At high speeds the bulb will burn out, have used 12v bulbs to correct problem (not included).
- Attach the headlight to the mounting bracket and mount that bracket to the front fork, like you would when installing a front brake. Wire the tail light and ground said wire to the frame or a fender (where applicable).
- Run the wires of both the head and tail lights to the generator and mount them tight to the frame.
- Mount the dynamo to its bracket, and the bracket to your seat post. Be sure to press the rubber contact wheel tight to the wheel so it grabs the wheel efficiently.
Customer ReviewsWrite a review
Bikeberry's Order Process and Delivery was exceptional. I have not installed the headlight yet so cannot review that.
great stuf,dont stop making it. thanky! !and ndelivery on time
I ordered a 12 volt and got a 6 volt.
pretty good I bought one and it seems to be a brushless permanant magnet motor. ground is connected to the chassis and you have 2windings to tap into. Throw a 2 phase bridge rectifier, 5v ldo regulator, and capacitor on and you have a setup that won't burn out with high speed use!