New, Industry Leading 2000W, 185Nm torque motor option is now 1.1 lbs lighter and features a lightweight magnesium body

Tired of cutting your ride short? With up to 1050Wh of battery juice, you can get 52+ miles of range. Trailblazer leads the industry with up to a 1050Wh battery while weighing only 55 lbs fully loaded!

Your Trailblazer is set up for YOU and YOUR riding style and weight, right from the factory! It is set up from the factory for optimal off-road performance

Your Trailblazer is fully assembled in our USA warehouse to your exact specifications. From hand-built wheels to Magura brakes, the Trailblazer is loaded!

With the 2000W motor system, you can achieve up to 40mph, on flat ground with a 170lb rider!

With its triple sensor system (1 torque, 2 speed sensors) it reacts with lightning speed to your pedal-power input

Thanks to its advanced battery latching mechanism, swap batteries in as little as 5 seconds!

Motor: Bafang Mid Drive with custom controller/firmware. 750W (M600) configuration.
Battery: USA-made Quick Change system. Options for 48V or 52V (2000W); capacities ranging from 10AH to 20.25AH.
UI/Remote: DPC 245 display, 5 Levels of PAS, Bluetooth® and App capability with handlebar remote.
Charger: Custom 100-240V charger with DC 5.5 Plug. Outputs: 54.6V or 58.8V (2000W) at 2A/4A/5A.
Wiring: Custom HPC wiring harness including Brake Cutoff safety sensors.
Frame: HPC Carbon Frame with 155mm travel, 148mm spacing, and full internal cable routing. Fits 27.5"+ or 29" wheels.
Fork: DVO Diamond D2, 29", 160mm Travel.
Rear Shock: DVO Topaz T3, 185x55 Trunion.
Headset: FSA Orbit 1.5 ZS Internal with sealed bearings.
Brakes: Magura MT4 Dual Piston hydraulic brakes (Front/Rear) with 180mm rotors and metallic pads.
Drivetrain: SRAM GX Eagle 12-speed system (Trigger shifter and Rear Derailleur).
Cassette: SRAM XG-1230, 11-50t range.
Crankset: 170mm Aluminum ISIS spline with a 38T Narrow/Wide steel chainring.
Chain: KMC E12 EPT (124 links).
Rims: Alex MD35 (35mm inner width for 27.5+ or 30mm for 29"), hookless alloy, tubeless ready.
Hubs: HPC alloy with sealed cartridge bearings (15x110mm Front / 148x12mm Rear).
Spokes: Custom Phil Wood 14g, black.
Tires: Kenda Nevegal Pro (27.5x2.8 or 29x2.4 options).
Handlebars: 6061 MTN bars, 800mm width, 35mm diameter (Rise: 30mm for S1/S2, 40mm for S3-S6).
Stem: Spank Spoon 318, 43mm length.
Seatpost: SDG Tellis dropper post (M/L: 125mm, XL: 150mm travel) with Puget 2x lever.
Saddle: WTB Volt with Cr-mo rails.
Grips: SDG Thrice (Large 33mm).